Installation instructions for handlebar density mirrors 2 pieces [E -test mark] - Ducati Monster 600 620 750 1000 S4 S4R

• Step 1: Preparation
• Step 2: Remove the old mirrors
• Step 3: Assembly of the handlebar diligence mirror
• Step 4: adjustment the mirror
• Step 5: Check stability
• Step 6: final control

Step 1: Preparation

Make sure you have all the tools you need. This includes an Allen key, possibly a screwdriver and a cloth for wiping the handlebar area.

Step 2: Remove the old mirrors

Loose the screws of the old mirrors with the Allen key and carefully remove them. Make sure not to lose the screws.

Step 3: Assembly of the handlebar diligence mirror

Put the new handlebars into the handlebars. Make sure you are positioned correctly and tighten the screws.

Step 4: adjustment the mirror

Adjust the mirrors in the desired position so that you have an optimal view. This can be done by simply turning or tilting the mirrors.

Step 5: Check stability

Check whether the mirrors are firm and stable. Perform a light printing test to ensure that you don't wobble.

Step 6: final control

Perform a last check and make sure that everything is properly assembled. If necessary, clean the area around the mirror.

How often should I set the mirrors?

It is advisable to check the mirrors on every trip, especially after long trips or if you adjust the handlebar.

Can I also use the mirrors on other motorcycles?

The handlebars are specially designed for Ducati Monster models, but may also be mounted on other motorcycles with a similar handlebar diameter.