Harley Davidson Flst [INTACT] - Bike Power Battery GEL YTX20L-BS

The INTACT Bike Power GEL YTX20L-BS motorcycle battery represents the pinnacle of modern battery technology for motorcycles and has been specially developed for vehicles with high electrical demands and ABS systems.

Technical data:

• Type: Maintenance-free, factory activated AGM
• Volts: 12V
• Cold start current: 300 A (DIN)
• Dimensions: 175mm x 87mm x 155mm
• Weight: 6400g
• Volume: 2888 cm³

Performance characteristics

The INTACT Bike Power battery GEL YTX20L-BS is characterized by up to 30% higher performance compared to conventional motorcycle batteries. This is achieved through the use of non-woven separators and a fixed electrolyte in gel form, which results in very low self-discharge and high vibration resistance.

Care and maintenance

To maximize the life of your motorcycle battery, you should follow the following care instructions:

• Only use the battery as a starter battery for its intended purpose.
• Keep the surface of the battery clean and dry to avoid current leakage and self-discharge.
• Check the level at least every 6 months and top up with purified water if necessary.
• Have the charge controller checked regularly by a specialist, especially if there is a lot of water loss.

For optimal maintenance, it is important to keep the battery at least 75% charged to always ensure sufficient starting capacity and not to damage the battery.

Storage and operation

For vehicles used only seasonally, the same loading and inspection guidelines apply. The ideal storage temperature for a longer standing phase is between 10 and 15 degrees Celsius in order to minimize self-discharge and water requirements.

Remember that regular inspection and proper care not only extends the life of your battery, but also increases the performance and safety of your vehicle.