- Step 1: required tools and materials
- Step 2: Preparation of the motorcycle
- Step 3: Remove the old clutch train
- Step 4: Install new clutch train
- Step 5: Setting the clutch train
- Step 6: Completion and tests
Step 1: required tools and materials
To replace the clutch train of the Yamaha YZF R1 Rn04, you need the following tools and materials:
Step 2: Preparation of the motorcycle
Make sure the motorcycle is on a flat surface. Switch off the engine and remove the key. If necessary, secure the motorcycle with a stand.
Step 3: Remove the old clutch train
Open the cover of the clutch lever to get access to the old clutch train. Loosen the screw on the coupling lever and remove the old train. Make sure the train is laid to correctly thread the new train.
Step 4: Install new clutch train
Thread the new clutch train through the same route as the old. Make sure that the train is not kinked or tangled. Attach the train to the clutch lever and tighten the screw.
Step 5: Setting the clutch train
Set the clutch train so that it has the right scope. Usually the scope should be about 2-3 mm. Test the lever to ensure that the clutch works properly.
Step 6: Completion and tests
Check all the connections and make sure that the clutch train is installed correctly. Start the engine and test the clutch in the stand and while driving. Pay attention to a smooth shifting.
Care for the clutch train
Frequently asked questions
How often should the clutch train be waited?
It is recommended to check the clutch train at least once a season, especially before long journeys.
What can I do if the clutch does not work properly?
First check the setting of the clutch train. If the problem continues, it could be due to the clutch mechanics or the train itself. In this case you should consult a specialist.
Price: € 29