Installation instructions for Yamaha XT 350 55V [all construction years] - speedometer wave - reinforced execution

• Step 1: Preparation
• Step 2: Remove the old speedometer wave
• Step 3: Insert the new speedometer wave
• Step 4: fastening of the speedometer wave
• Step 5: Checking the function
• Step 6: Maintenance and care

Step 1: Preparation

Before you start installing the new speedometer, make sure you have all the tools you need. This includes a wrench, a screwdriver and possibly pliers. Also make sure that your motorcycle is on a stable stand.

Step 2: Remove the old speedometer wave

Locate the old speedometer wave on your motorcycle. Loosen the fastening screws with the wrench and carefully pull out the shaft. Make sure not to damage any other parts.

Step 3: Insert the new speedometer wave

Take the new reinforced speedometer wave and carefully insert it in the same place where the old wave has been removed. Make sure that the shaft is properly aligned.

Step 4: fastening of the speedometer wave

After the new speedometer wave is used, attach them with the screws previously dissolved. Pull the screws tight, but be careful not to overturn them so that they can avoid damage.

Step 5: Checking the function

Start the motorcycle and check the function of the speedometer. Make sure that the speedometer works properly and that there are no unusual noises.

Step 6: Maintenance and care

In order to extend the lifespan of your speedometer wave, you should regularly check all connections for wear and, if necessary, smear. Good care ensures that your speedometer always works precisely.

FAQ 1: How often should I change the speedometer?

The speedometer wave should usually be changed every 2-3 years or with visible wear. Regular inspections help to recognize problems early.

FAQ 2: What can I do if the speedometer doesn't work?

If the speedometer does not work, first check the speedometer wave for damage and the correct fastening. If everything is fine, the problem could also be in the speedometer itself.