Installation instructions for Suzuki DR 600 SN41A [all construction years] - coupling train - increased execution

• Step 1: Make preparations
• Step 2: put together tools
• Step 3: Remove old clutch trains
• Step 4: Install new clutch train
• Step 5: Set coupling
• Step 6: Test the clutch

Step 1: Make preparations

Make sure you have all the necessary materials and tools ready. Check whether the motorcycle is on a stable surface.

Step 2: put together tools

You need a wrench, a cross slot screwdriver and possibly a pliers. Make sure everything is at hand.

Step 3: Remove old clutch trains

Start with the removal of the old clutch train. Loosen the fastening screws and carefully pull out the train. Make sure not to damage any other parts.

Step 4: Install new clutch train

Introduce the new, reinforced clutch train into the brackets. Make sure it is right and that all the fastenings are tightened safely.

Step 5: Set coupling

Check the voltage of the clutch train and set it as required. Make sure that the clutch works smoothly.

Step 6: Test the clutch

Start the motorcycle and test the clutch when switching through the corridors. Pay attention to smooth response.

How often should I change the clutch train?

It is recommended to change the clutch train every 2-3 years or in the event of signs of wear.

Can I change the clutch train myself?

Yes, with the right tools and instructions you can change the clutch train yourself. Make sure you follow all steps carefully.