Installation instructions for Honda CB 750 K RC01 [all construction years] - coupling train - increased execution

• Step 1: Preparation
• Step 2: Tools ready
• Step 3: Remove the old clutch train
• Step 4: Use a new clutch train
• Step 5: make settings
• Step 6: Carry out the test drive

Step 1: Preparation

Before you start working, make sure you have the required parts and tools on hand. Check whether the increased clutch train for your Honda CB 750 K RC01 is suitable.

Step 2: Tools ready

You need a wrench, a Kreuzschlitzschra Screwriver, a side cutter and possibly a pliers. Place all tools within reach to facilitate the process.

Step 3: Remove the old clutch train

Open the bonnet and locate the clutch train. Loosen the fastening screws and carefully pull out the old clutch train. Make sure not to damage any other components.

Step 4: Use a new clutch train

Guide the new reinforced clutch train through the same opening. Make sure that he sits correctly and fasten the screws back to your place. Check whether the train is smooth.

Step 5: make settings

Adjust the clutch train according to the manufacturer. Make sure that the scope is set correctly to ensure optimal driving behavior.

Step 6: Carry out the test drive

Start the motorcycle and take a short test drive. Check whether the clutch works smoothly and no unusual noises occur. If necessary, carry out further adjustments.

Care tips

FAQ 1: How often should the clutch train be changed?

The clutch train should be changed every 10,000 to 15,000 kilometers or if signs of wear.

FAQ 2: What can I do if the clutch slips?

If the clutch slips, first check the clutch train for correct game. If necessary, you have to readjust the train or have the clutch examined yourself.