Installation instructions for handlebars 2 pieces [E-test mark]-Yamaha MT-03 MT-09 MT-125

• Step 1: Preparation
• Step 2: Remove old mirrors
• Step 3: Prepare the handlebars
• Step 4: Installation of the mirror
• Step 5: adjustment the mirror
• Step 6: completion and control

Step 1: Preparation

Make sure you have all the required tools ready, including an Allen key and possibly a wrench. Check the scope of delivery of the handlebars.

Step 2: Remove old mirrors

Remove the existing mirrors from your motorcycle by loosening the screws with the Allen key. Make sure to keep the screws in a safe place.

Step 3: Prepare the handlebars

Check the handlebars for damage and make sure that the e-test marks are clearly visible. If necessary, remove protective films.

Step 4: Installation of the mirror

Put the handlebars into the handlebars and fix them with the supplied screws. Do not put the screws too tightly to avoid damage.

Step 5: adjustment the mirror

Set the mirrors so that you have an optimal view of the subsequent traffic. Test the position before you finally put on the screws.

Step 6: completion and control

Finally, check whether the mirrors are tight and the view is optimal. Make a short test drive to ensure that everything is installed correctly.

Care tips

Question: Can the handlebars be used universally?

Yes, the handlebars are suitable for the Yamaha MT-03, MT-07, MT-09 and MT-125 models.

Question: Is an e-test mark required?

Yes, the e-test mark confirms the approval of the mirrors for road traffic in Germany.