Installation instructions for handlebars 2 pieces [E -test mark] - Husqvarna Supermoto Vitpilen Svartpilen 401 701

• Step 1: Preparation
• Step 2: Tools ready
• Step 3: Remove old mirrors
• Step 4: Mount handlebars
• Step 5: Setting the mirror
• Step 6: final control

Step 1: Preparation

Make sure your motorcycle is on a stable surface. Check whether you have all the tools and spare parts required.

Step 2: Tools ready

For the assembly of the handlebars you need an Allen key, a wrench and possibly a pliers.

Step 3: Remove old mirrors

Remove the old mirrors by loosening the fastening screws with the Allen key. Make sure not to lose the screws.

Step 4: Mount handlebars

Use the new handlebars into the intended brackets and tighten the screws with the wrench. Make sure that the mirrors are aligned correctly.

Step 5: Setting the mirror

Adjust the mirrors so that you have an optimal view of the traffic behind you. Adjust the angles as needed.

Step 6: final control

Check whether all screws are tight and the mirrors are safely assembled. Perform a short test drive to test the view.

Care tips

FAQ 1: Are the handlebars legal?

Yes, the handlebars with e-test marks are approved for road traffic and correspond to the legal regulations.

FAQ 2: Does the mirror fit to other motorcycle models?

The handlebars are specially designed for the Husqvarna Supermoto Vitpilen and Svartpilen 401 and 701, but can also be installed on other models with similar handlebar openings.