Installation instructions for Ducati 748 916 998 [all construction years] - gas train / cable train - reinforced

• Step 1: Prepare tools and materials
• Step 2: Remove the old cable
• Step 3: Install a new cable train
• Step 4: make settings
• Step 5: carry out the function test
• Step 6: Care of the gas train

Step 1: Prepare tools and materials

Before you start working, make sure you have all the tools and materials you need. This includes:

Step 2: Remove the old cable

Start localizing the old gas train. Loosen the fastening screws and carefully pull the old train off. Make sure not to damage any other parts.

Step 3: Install a new cable train

Place the new reinforced gas train to the same place where the old train was. Make sure that it is properly laid and there is no tension on the cable train before you attach it.

Step 4: make settings

Make sure the gas train is set correctly. Check the scope and set it up if necessary to ensure optimal performance.

Step 5: carry out the function test

Make a function test before the final assembly. Turn the throttle and observe whether the engine reacts evenly. Correct any problems immediately.

Step 6: Care of the gas train

In order to extend the lifespan of your gas train, you should regularly observe the following care tips:

FAQ 1: How often should I check the gas train?

It is recommended to check the gas train for wear and functionality at least once a season.

FAQ 2: What can I do when the gas train is stuck?

If the gas train is stuck, first check the laying and the fastenings. Lubricate the train and make sure that it is freely movable. If you have permanent problems, you should replace the gas train.