Step 1: Preparation

Before you start installing the new LED blinkers, make sure you have all the tools you need. This includes a screwdriver, pliers and possibly cable ties. Separate the battery to avoid electrical blows.

Step 2: Remove old indicators

Loose the screws of the old indicators with the screwdriver. Carefully pull off the old indicators and remove the cable connections. Make sure not to damage the cables.

Step 3: Connect resistance

Connect the supplied resistances to the cables of the new LED blinker. Make sure to consider the polarity: Usually the black wire is the minus pole. Use shrink hoses or insulating tape to secure the connections.

Step 4: mount new indicators

Place the new turn signals to the places provided and fix them with the screws. Make sure you sit tight and have no game movement.

Step 5: function test

Connect the battery again and test the new turn signals. Check whether you flash correctly and whether the resistors work properly. Pay attention to the flashing frequency.

Step 6: Care and maintenance

To extend the lifespan of your new turn signals, regularly clean them from dirt and dust. Check the cable connections and resistances for damage.

FAQ 1: Do I need special tools for installation?

To install the LED blinkers, you only need a screwdriver and pliers. If you want to use additional cable ties, they can be helpful.

FAQ 2: What do I do if the indicators don't flash properly?

If the turn signals do not flash properly, check the cable connections and make sure that the resistors are correctly connected. Also check the functionality of the turn signals themselves.

4 LED turn signal black resistances [E -test mark] - Suzuki DR BIG 800S 650 750 800 600

Price: 49.00 €