Step 1: Preparation

Make sure the motorcycle is on a stable surface and the key is pulled off. Prepare all the required tools: screwdriver, pliers, insulating tape and the new LED blinkers with resistances.

Step 2: Remove old indicators

Carefully screw off the old turn signals. Disconnect the electrical connections by carefully pulling the plugs off. Make sure not to damage the cables.

Step 3: Connect resistance

Connect the supplied resistors to the cables of the new turn signals. These prevent the indicators from flashing too quickly. Make sure to consider the polarity and use insulating tape to secure the connections.

Step 4: mount new indicators

Place the new LED blinkers to the places intended and screw them tight. Make sure you sit safely and stable.

Step 5: carry out the function test

Turn on the motorcycle and test the new turn signals. Check whether you flash correctly and whether the resistors work properly. If necessary, check the connections.

Step 6: Care and maintenance

Check the function of the turn signals and resistors regularly. Clean the turn signals with a soft cloth and avoid aggressive cleaning agents to extend the lifespan.

Question 1: Are the LED indicators of E-test mark certified?

Yes, the LED blinkers are equipped with an e-test mark, which means that they meet the legal requirements and are approved in road traffic.

Question 2: Can I install the indicators myself?

Yes, the installation is simple and can be carried out with basic tools. Simply follow the step-by-step instructions to ensure that everything is installed correctly.

4 LED turn signal black resistances [E -test mark] - Triumph Bonneville T100 Thunderbird Scrambler

Price: 49.00 €