Step 1: Preparation

Make sure you have all the tools you need, including screwdrivers, pliers and electrical insulating tape. Wear suitable protective clothing.

Step 2: Disassemble old indicators

Turn off the ignition and remove the old turn signals by loosening the screws and separating the electrical connections. Make sure not to damage the cables.

Step 3: Install resistors

Install the supplied resistances near the new turn signals. Connect the resistors to the turn signal cables to ensure that the indicators work properly.

Step 4: mount new indicators

Place the new LED indicators to the intended area and attach them to the appropriate screws. Make sure you sit safely and don't wobble.

Step 5: Mail the electrical connection

Connect the cables of the new turn signals to the cables of the motorcycle. Use insulating tape to secure the connections and avoid a short circuit.

Step 6: Functional test

Turn on the ignition and test the new turn signals. Check whether you glow and flash correctly. If not, check the electrical connections and resistances.

Care tips

FAQ 1: Are the resistance necessary?

Yes, the resistances are necessary to ensure that the LED indicators work correctly and do not flash too quickly.

FAQ 2: Can I install the indicators myself?

Yes, the installation is easy and can be carried out with the right tools and some skill yourself. In the event of uncertainties, however, we recommend that we consult a specialist.

4 LED blinker black resistances [E -test mark] - Kawasaki Z 125 650 900 H2 RS

Price: 49.00 €