Installation instructions for 4 LED blinker black resistances [E -test mark] - Kawasaki KLR 650 250 600 KLX 200 Kla

• Step 1: Preparation
• Step 2: Remove old indicators
• Step 3: Install new turn signals
• Step 4: Mount resistance
• Step 5: Checking the function
• Step 6: Care of the indicators

Step 1: Preparation

Make sure you have all the tools and materials required. This includes the new LED blinkers, resistances, screwdrivers and possibly a multimeter for checking.

Step 2: Remove old indicators

Switch off the motorcycle and remove the battery to avoid short circuits. Loosen the screws that hold the old indicators in place and carefully separate the cables.

Step 3: Install new turn signals

Place the new LED blinkers to the places provided and attach them to the screws. Make sure you lay the cables correctly to avoid damage.

Step 4: Mount resistance

Install the resistors in parallel with the indicators to regulate the flashing speed. Connect the cables according to the manufacturer's instructions.

Step 5: Checking the function

Connect the battery again and test the turn signals. Make sure that you flash evenly and that no error messages are displayed.

Step 6: Care of the indicators

Clean the turn signals regularly with a damp cloth to remove dirt and dust. Check the cable connections for corrosion and, if necessary, pull in the screws.

FAQ 1: Are the indicators also suitable for other motorcycle models?

The LED blinkers are specially designed for the Kawasaki KLR 650, 250, 600, KLX 200 and Kla models. Adaptation may be necessary for other models.

FAQ 2: How long do the LED turn signals last?

Under normal conditions, LED blinkers can last several years, depending on the frequency of use and the ambient factors.