Installation instructions for 4 LED blinker black resistances [E -test mark] - Honda XL XR 600 250 350 650 V L R RM

• Step 1: Preparation
• Step 2: Remove old indicators
• Step 3: attach new LED indicators
• Step 4: Install resistance
• Step 5: carry out the function test
• Step 6: Care instructions

Step 1: Preparation

Before you start installing the new LED blinkers, make sure you have the right tools on hand. You need a screwdriver, a pliers and possibly a soldering iron to connect the resistances.

Step 2: Remove old indicators

Switch off the motorcycle and carefully remove the old indicators. Loosen the screws and pull the cables off. Be careful not to damage the cables.

Step 3: attach new LED indicators

Take the new LED blinkers and assemble them in the same place as the old indicators. Make sure you tighten the screws so that the indicators are securely attached.

Step 4: Install resistance

In order to correct the LED indicators, you must install the resistances. Connect the resistances according to the instructions from the manufacturers and secure them in a suitable place.

Step 5: carry out the function test

Turn on the motorcycle and test the new turn signals. Make sure that you flash correctly and that no error messages are displayed.

Step 6: Care instructions

To extend the lifespan of your new LED blinkers, clean them regularly from dirt and dust. Check the connections every now and then for corrosion or loose cables.

FAQ 1: Are the LED blinkers suitable for all Honda models?

The LED blinkers are specially designed for the Honda XL, XR 600, 500, 250, 350, 650 V, L and R models. Check the specifications to ensure that you are compatible with your model.

FAQ 2: How long do LED blinkers hold compared to conventional indicators?

LED blinkers have a longer lifespan than conventional light bulbs. You can last up to 50,000 hours, while light bulbs often have to be replaced after 1,000 hours.