Step 1: Preparation

Before you start installation, make sure you work in a well -lit area. Switch off the motorcycle and separate the battery to avoid electrical blows.

Step 2: Ensure the right tools

You need a wrench, pliers, a cross slot screwdriver and possibly a soldering iron if you have to connect the cables. Check whether all tools are available.

Step 3: Remove old indicators

Carefully remove the old turn signals by loosening the screws and removing the cables. Make sure not to damage the cables.

Step 4: Install new turn signals

Place the new LED blinker to the appropriate area and attach it to the screws. Make sure that you are securely attached and do not wiggle.

Step 5: attach resistances

Install the supplied resistances on the turn signal cables to ensure correct flashing. This prevents a quick flashing that often occurs with LED indicators.

Step 6: Functional test

Connect the battery again and test the new turn signals. Make sure that you flash evenly and without flickering.

FAQ 1: Are the indicators weatherproof?

Yes, the 4 LED blinkers are weatherproof and suitable for use under different weather conditions.

FAQ 2: Do I need special tools for installation?

No special tools are required for installation, but a standard tool set makes the process considerably easier.

4 LED blinker black resistances [E -test mark] - Ducati Hypermotard 796 821 939 950 1100

Price: 49.00 €