1. Preparation

Make sure your motorcycle is on a stable surface. Switch off the ignition and remove the battery to avoid short circuits. Put all the required tools and parts ready.

2. Assembly of the turn signals

Remove the old turn signals if available. Screw the new LED indicators with the M8 thread to the intended areas. Make sure that you sit firmly and are aligned in the right direction.

3. Connect the resistances

Connect the resistances to the LED indicators and the electrical wiring of the motorcycle. Make sure that the connections are safe and isolation if necessary with a shrink tube or insulating tape.

4. Test the turn signals

Connect the battery and switch on the ignition. Test the new turn signals to ensure that you work properly. Check both the luminosity and the flashing frequency.

5. Final assembly

If everything works, fasten all cables and make sure that no loose wires are visible. If necessary, bring covers or cladding again.

6. Care of the indicators

Clean the turn signals regularly with a damp cloth to remove dirt and dust. Check the fastenings and electrical connections regularly for your safety.

How long do LED turn signals last?

LED blinkers usually have a lifespan of up to 50,000 hours, depending on the use and care.

Can I install the indicators myself?

Yes, as long as you have basic knowledge of motorcycle technology and the necessary tools, you can carry out the installation yourself.

2 LED turn signal black resistances [E -test mark] - Universal M8 thread

Price: € 29