Installation instructions for 2 LED turn signals black resistances [E -test mark] - Suzuki DR BIG 800S 650 750 800 600

• Step 1: Preparation
• Step 2: Remove old indicators
• Step 3: Install resistors
• Step 4: Connect new turn signals
• Step 5: function test
• Step 6: completion and care

Step 1: Preparation

Make sure you have all the required tools and materials, including the new LED indicators, resistors and any tools such as wrenches and pliers.

Step 2: Remove old indicators

Switch off the ignition. Remove the cover of the old indicators by loosening the screws. Carefully separate the cables of the old indicators.

Step 3: Install resistors

Connect the resistances to the cables of the new LED indicators. Make sure you observe the polarity and may use shrink hoses to insulate the compounds.

Step 4: Connect new turn signals

Connect the new LED blinkers to the motorcycle with the cables. Make sure the connections are fixed and there are no loose wires.

Step 5: function test

Turn on the ignition and test the new turn signals. Check whether both sides flash correctly and whether the speed is normal.

Step 6: completion and care

Retain the cover of the indicators. Clean the turn signals regularly to ensure visibility and avoid rust formation.

How often should the indicators be checked?

It is recommended to check the indicators at least once a month, especially before long journeys.

Can I install the resistances myself?

Yes, the installation of the resistors is easy and can be carried out with basic tools and knowledge. However, make sure to follow the instructions carefully.