Step 1: required tools and materials

Make sure you have all the tools and materials required. You need:

Step 2: Remove old indicators

Start removing the old indicators from your Yamaha MT-03, MT-07, MT-09 or MT-125. Loosen the screws that hold the indicators and pull off the plugs.

Step 3: Insert new LED indicators

Place the new LED blinkers in the place of the old indicators. Make sure you connect the plugs correctly and secure the indicators safely.

Step 4: Install resistance

Install the resistors in parallel to the LED indicators to ensure the correct flashing frequency. Isolate the connections with insulating tape or shrink hoses to avoid short circuits.

Step 5: carry out the function test

Turn on the ignition and test the new turn signals. Make sure that you flash evenly and that no error messages are displayed.

Step 6: Care and maintenance

Check the functionality of your LED indicators and the connections regularly. If necessary, clean the indicators with a damp cloth to remove dirt and dust.

FAQ 1: Why do I need resistance for LED blinkers?

LED blinkers need resistors to ensure the correct flashing frequency. Without resistors, LED indicators usually flash faster than conventional incandescent lamps.

FAQ 2: Are LED indicators safe?

Yes, LED blinkers are certain as long as they are installed correctly and have the necessary e-test mark. Make sure to use the right components.

2 LED blinker Clear resistance [E-test mark]-Yamaha MT-03 MT-07 MT-09 MT-125

Price: € 29