Step 1: Preparation

Before you start installing the LED blinkers, make sure that the motorcycle is on a stable surface and the engine is switched off. Wear suitable protective clothing to protect yourself from injuries.

Step 2: collect tools

For the installation you need the following tools: a wrench, a cross slot screwdriver, a side cutter and insulating tape. Make sure everything is at hand.

Step 3: Remove old indicators

Start loosening the screws of the old indicators. Carefully remove the turn signals and pull the cables off. Make sure not to damage the cables.

Step 4: Install new turn signals

Place the new LED blinkers to the places provided and attach them to the screws. Make sure that the indicators sit firmly and cannot move.

Step 5: Connect resistance

The resistance must be connected in parallel to the turn signal cables. Cut the cables at the right place and connect the resistors to the help of insulating tape. Make sure that no exposed wires are visible.

Step 6: completion and test

Check all the connections and make sure that everything sits firmly. Turn on the motorcycle and test the new turn signals to ensure that you work properly.

Question 1: Are the LED indicators approved?

Yes, the LED indicators with e-test marks are approved for road traffic and meet the legal requirements.

Question 2: What do I do if the indicators don't work?

Check all electrical connections and make sure that the resistors are properly connected. Also make sure that the indicators are not damaged.

2 LED blinker Clear resistance [E -test mark] - Triumph Speed ​​Triple 955i 10501200 Street 675

Price: € 29