Step 1: Preparation

Make sure you have all the tools and materials required. This includes new LED turn signals, resistors, a screwdriver, pliers and insulating tape.

Step 2: Remove old indicators

Switch off the ignition and separate the battery. Remove the old turn signals by loosening the screws and pulling the electrical connections off.

Step 3: attach resistance

Connect the resistances to the new LED indicators. Make sure you use the correct connections to ensure a correct function. Isolate the connections well with insulating tape.

Step 4: attach new indicators

Mount the new LED blinkers on the motorcycle. Attach them with the appropriate screws and tighten them. Make sure you sit safely.

Step 5: carry out the function test

Connect the battery again and test the new turn signals. Check whether you flash correctly and the resistors work properly.

Step 6: Care and maintenance

Check the function of your turn signals and resistances regularly. Keep the connections clean and free of corrosion to avoid long -term problems.

How often should the indicators be waited?

It is recommended to check the indicators at least once a year, especially before long journeys.

Can I install the LED indicators myself?

Yes, the installation is relatively simple and can be carried out by most motorcyclists as long as the steps are followed.

2 LED blinker Clear resistance [E -test mark] - Aprilia RS Tuono 125 660 1000 1100

Price: € 29