2 LED blinker clear resistances - KTM LC2 125 Yamaha dt 125 R

Step 1: Preparation

Before you start installing the LED blinkers, make sure that you have all the necessary tools ready, including screwdrivers, pliers and insulating tape. Wear suitable protective equipment.

Step 2: Remove old indicators

Switch off the ignition of your motorcycle. Remove the covers of the old indicators by loosening the screws. Carefully pull off the cables to avoid damage.

Step 3: Install resistors

Connect the resistances provided to the LED indicators. Make sure you use the correct cable connections. Isolate the connections with insulating tape to avoid short circuits.

Step 4: attach new indicators

Put the new LED indicators in the places previously removed. Attach them safely with the screws. Make sure the flashing lights sit tight and don't wiggle.

Step 5: carry out the function test

Turn on the ignition and test the new turn signals. Make sure that you flash correctly and the function is flawless. Also check whether the resistors get warm, which is normal.

Step 6: Care and maintenance

Check the functionality of the turn signals and resistors regularly. Clean the turn signals of dirt and dust to ensure visibility. Store your motorcycle in a dry place to avoid corrosion.

FAQ 1: Are the LED indicators compatible with every motorcycle?

The LED blinkers are specially developed for KTM LC2 125 and Yamaha DT 125 R, but can be compatible with other models if the correct adapters are used.

FAQ 2: How long do the LED turn signals last?

High quality LED blinkers can take several thousand hours. With proper care and maintenance, a long service life is guaranteed.

2 LED blinker Clear resistance [E -test mark] - KTM LC2 125 Yamaha dt 125 R

Price: € 29

Make an offer
Make an offer
Make an offer