Installation instructions for Suzuki Bandit GSF 650 S WVB5 [2005] - Choke train

• Step 1: Preparation
• Step 2: Access to the choke train
• Step 3: Remove the chate train
• Step 4: Install a new choke train
• Step 5: Set chate train
• Step 6: completion and test

Step 1: Preparation

Before you start replacing the choke train, make sure you have the right tools on hand. This includes a wrench, a screwdriver and possibly pliers. Work in a well -lit area.

Step 2: Access to the choke train

To get access to the chief train, you must first remove the cladding of the motorcycle. Loosen the corresponding screws and carefully lift the cladding to make the components visible underneath.

Step 3: Remove the chate train

Find the choke train and solve the fortifications. Carefully pull out the train and be careful not to damage any other components. Write down the position of the old choke train for installing the new.

Step 4: Install a new choke train

Put the new choke train into the same position in which the old choke train was. Make sure that it is laid correctly and that all fastenings are tightened.

Step 5: Set chate train

After the new choke train is installed, you have to set it. Check whether the choke works smoothly when activity and set the voltage if necessary to ensure optimal performance.

Step 6: completion and test

Put on the motorcycle cladding and secure it with the screws. Start the motorcycle and test the new choke train to ensure that everything works perfectly.

Care tips

Frequent questions

How often should I check the choke train?

It is recommended to check the choke train at least once a season or if there are any signs of problems such as stiff operation.

Can I change the choke train myself?

Yes, the exchange of the choke train is a comparatively simple task that can be carried out with the right tools and instructions itself.