Installation instructions for Suzuki Bandit GSF 1200 S WVA9 [2001] - Choke train

• Step 1: required tools and materials
• Step 2: Prepare motorcycle
• Step 3: Remove the chate train
• Step 4: Install a new choke train
• Step 5: Functional test
• Step 6: completion and care

Step 1: required tools and materials

Make sure you have the right tool at hand: a wrench, a screwdriver and the new choke train for the Suzuki Bandit GSF 1200 S WVA9 (built in 2001).

Step 2: Prepare motorcycle

Park the motorcycle on a stable surface and pull off the ignition key. Remove the bench to get access to the choke train.

Step 3: Remove the chate train

Locate the choke train on the body of the motorcycle. Loosen the screws that attach the choke train and carefully pull out the old train.

Step 4: Install a new choke train

Use the new choke train in the same place and attach it to the screws previously removed. Make sure that the train is really excited.

Step 5: Functional test

Test the new choke train by pressing it several times. Make sure that it works smoothly and returns properly.

Step 6: completion and care

Take the bench again and check all the connections. Clean the area to avoid dirt and deposit.

How often should I check the choke train?

It is recommended to check the choke train at least once a year to ensure that it is in perfect condition.

What can I do when the choke train is stuck?

When the choke train is stuck, check whether it is installed correctly and whether there is no contamination or damage. If necessary, it should be replaced.