Installation instructions for Moto Guzzi California Jackal 1100 KD [all construction years] - speedometer wave - increased execution

• Step 1: required tools and materials
• Step 2: Prepare motorcycle
• Step 3: Remove the old speedometer wave
• Step 4: Install new speedometers
• Step 5: Test of the speedometer wave
• Step 6: Care of the speedometer wave

Step 1: required tools and materials

To replace the speedometer wave on your Moto Guzzi California Jackal 1100 KD, you need the following tools and materials:

Step 2: Prepare motorcycle

Make sure the motorcycle is on a stable stand and the engine is switched off. Remove the ignition key and secure the surroundings.

Step 3: Remove the old speedometer wave

Locate the old speedometer wave on the instrument panel and on the gear unit. Loosen the screws and carefully pull out the wave. Make sure not to damage any other parts.

Step 4: Install new speedometers

Use the new speedometer wave on the gear unit and pull it to the instrument panel. Attach the shaft to both ends with the screws that you have previously removed.

Step 5: Test of the speedometer wave

Start the engine and drive at low speed to ensure that the speedometer works work correctly. Check whether the speed is displayed precisely.

Step 6: Care of the speedometer wave

To extend the lifespan of the speedometer wave, clean them regularly and check the fortifications to firm seat. Make sure that no dirt particles can penetrate.

How often should I check the speedometer wave?

It is recommended to check the speedometer wave at least once a year, especially before long journeys or after long periods.

Can I replace the speedometer work myself?

Yes, as long as you have basic mechanical skills and the right tool, you can replace the speedometer wave yourself. However, always pay attention to the manufacturer's instructions.