Installation instructions for handlebar density mirrors 2 pieces [E -test mark] - MZ MUZ SM 125 Gangsta Cup

• Step 1: Make preparations
• Step 2: Remove old mirrors
• Step 3: attach new mirrors
• Step 4: adjustment the mirror
• Step 5: Check security
• Step 6: Care of the mirrors

Step 1: Make preparations

Before you start installing the handlebars, collect all the required tools: wrenches, Allen keys and a screwdriver. Make sure the motorcycle is on a stable surface.

Step 2: Remove old mirrors

Start removing the old mirrors. Loosen the screws that attach the mirrors to the handlebar recording and carefully pull them off. Store the old parts safely if you want to use them again later.

Step 3: attach new mirrors

Take the new handlebars and insert them into the intended brackets on the handlebar. Make sure that the mirrors sit tight and put on the screws evenly to prevent slipping.

Step 4: adjustment the mirror

Set the new mirrors so that you have an optimal view of the traffic behind you. This can be done by turning and tilting the mirrors. Make sure that you will not wiggle or pretend while driving.

Step 5: Check security

After installation, check whether all screws are tight and the mirrors are securely attached. Make a short test drive to ensure that the visibility is good and everything remains stable.

Step 6: Care of the mirrors

To extend the lifespan of your handlebars, clean them regularly with a gentle cleaning agent and a soft cloth. Avoid aggressive chemicals that could damage the surface.

Question 1: Are the mirrors compatible with every motorcycle?

The handlebars are specially developed for the MZ MUZ SM 125 Gangsta Cup, but can also be used with other motorcycles if the brackets fit.

Question 2: How do I recognize whether the mirrors are set correctly?

The mirrors are set correctly if you have a clear view of the traffic behind without the mirrors wiggling or adjusting yourself while driving.