Installation instructions for Honda NX 650 Dominator RD02 [all construction years] - gas trains - increased execution

• Step 1: Prepare tools and materials
• Step 2: Remove the old gas train system
• Step 3: Adjust new gas train system
• Step 4: Install gas trains
• Step 5: make settings
• Step 6: Test run and final review

Step 1: Prepare tools and materials

Make sure you have all the necessary tools and materials ready. This includes:

Step 2: Remove the old gas train system

Start removing the old gas train system. - Switch off the ignition and remove the battery to ensure that no electrical problems occur. - Loosen the screws that attach the gas trains to the carburetor and carefully pull them out.

Step 3: Adjust new gas train system

Compare the new gas trains with the old to ensure that you have the right length and the right connections. - Measure the length of the old trains and adapt the new ones if necessary. - Check the connections and make sure that you are compatible.

Step 4: Install gas trains

Install the new gas trains. - Guide the new trains through the brackets and the carburetor. - Make sure that the trains are not kinked or damaged.

Step 5: make settings

Check the setting of the gas trains. - Make sure that the gas train has enough play to ensure a proper function. - Place the trains as needed to ensure smooth gas response.

Step 6: Test run and final review

Perform a test run to ensure that everything works perfectly. - Start the motorcycle and test the gas after. - Check all connections and make sure that there are no leaks.

Care tips

FAQ

How often should the gas trains be changed?

The gas trains should be checked at least once a year and changed if signs of wear or damage.

Can I change the gas trains myself?

Yes, with the right tool and some technical understanding you can change the gas trains yourself. Pay attention to safety and follow the instructions carefully.