Step 1: Preparation

Make sure you work in a well -lit environment and have all the necessary materials on hand. Check whether the motorcycle is stable on a assembly stand.

Step 2: Tools ready

You need a wrench, an Allen key, pliers and, if necessary, a small slot screwdriver. Place everything within reach.

Step 3: Remove the old clutch train

Open the cover on the coupling lever and solve the old clutch train from the lever mechanism. Then go to the clutch page of the engine and remove the train from the clutch plate.

Step 4: Install new clutch train

Guide the new reinforced clutch train through the same places through which the old train was led. Make sure that the train is not kinked and runs smoothly.

Step 5: make settings

Set the voltage of the clutch train on the lever mechanics so that the lever works smoothly, and check whether the clutch mechanism works correctly.

Step 6: Test drive

Start the motorcycle and test the coupling function by carrying out several gear changes. Pay attention to perfect functioning and unusual noises.

How often should I check the clutch train?

It is recommended to check the clutch train at least every 1000 km or in front of longer journeys.

What to do if the clutch train tears?

If the clutch train tears, you should stop immediately and replace the train before you drive the motorcycle again.

Cagivate Planet / Raptor 125 [all construction years] - clutch train - reinforced

Price: 34.00 €