Installation instructions for Cagiva Supercity 125 [all construction years] - gas train for 34mm dellorto - reinforced

• Step 1: Preparation
• Step 2: Remove the old gas train
• Step 3: installation of the new gas train
• Step 4: Setting the gas train
• Step 5: Test of the function
• Step 6: Care of the gas train

Step 1: Preparation

Before you start replacing the gas train, make sure you have all the tools and spare parts required. This includes a wrench, a screwdriver and the new reinforced gas train for the 34mm dellorto carburetor.

Step 2: Remove the old gas train

Open the seat and remove the covering of the carburetor. Loosen the old gas train from the throttle valve and carefully pull it out. Make sure not to damage any other parts.

Step 3: installation of the new gas train

Guide the new gas train through the same route as the old one. Make sure that it is properly laid to avoid friction and wear. Attach the new gas train to the throttle valve.

Step 4: Setting the gas train

Set the gas train so that it has enough play but is not too loose. Check the throttle flap movement to ensure that it works evenly and without resistance.

Step 5: Test of the function

Start the Cagiva Supercity 125 and test the new gas train. Accelerate the machine to ensure that the throttle valves react smoothly. Listen to unusual noises or resistances.

Step 6: Care of the gas train

To extend the lifespan of the gas train, you should check it regularly for wear and apply lubricant if necessary. Keep the area around the gas train clean to avoid dirt accumulation.

Nursing instructions

FAQ 1: How often should I check the gas train?

It is recommended to check the gas train at least once a season, especially before longer trips.

FAQ 2: What signs indicate a defective gas train?

Signs of a defective gas train are uneven acceleration, a hanging throttle grip or unusual noises when pressing the throttle.