Installation instructions for BMW R 75/6 [all construction years] - gas trains - increased execution

• Step 1: Preparation
• Step 2: Tools and materials
• Step 3: Remove the old gas train
• Step 4: Install new gas train
• Step 5: Setting
• Step 6: completion and test

Step 1: Preparation

Before you start working, make sure that the BMW R 75/6 is on a stable surface. Wear suitable protective clothing and gloves.

Step 2: Tools and materials

Make sure you have the following tools and materials ready: wrenches, screwdriver, new reinforced gas trains, possibly lubricant.

Step 3: Remove the old gas train

Open the cladding and locate the old gas train. Loosen the fastenings and carefully pull out the gas train.

Step 4: Install new gas train

Give the new reinforced gas train at the same place where the old train was. Make sure that the train sits correctly in the brackets and is firm.

Step 5: Setting

Check the setting of the gas train. It should be smooth and no tension if the throttle is not operated.

Step 6: completion and test

Put on the cladding and test the gas train by pressing the throttle several times. Pay attention to smooth behavior.

Care tips

Frequent questions

How often should I change the gas train?

It is recommended to change the gas train every 10,000 km or in the event of visible wear and tear.

Can I replace the gas train myself?

Yes, the exchange of the gas train is relatively easy to carry out with the right tools and a little skill.