Installation instructions for Aprilia RX 50 [all construction years]- gas train complete with distributor

• Step 1: Preparation of the tool
• Step 2: Remove the old gas train
• Step 3: Installation of the new gas train
• Step 4: attach the distributor
• Step 5: Setting the gas pull voltage
• Step 6: Functional test

Step 1: Preparation of the tool

Make sure you have all the necessary tools and materials ready. You need a wrench, a cross slot screwdriver and the new gas train with distributor. Also provide a workbench or a suitable work area.

Step 2: Remove the old gas train

Open the bonnet and locate the old gas train. Loosen the screws that attach the gas train to the carburetor and the throttle. Carefully remove the old gas train from the bracket.

Step 3: Installation of the new gas train

Take the new gas train and guide it through the brackets. Make sure that the gas train sits properly and has no kinks or twists. Attach the gas train to the carburetor and the throttle with the screws previously removed.

Step 4: attach the distributor

Place the distributor at the intended area. Attach it with the corresponding screws. Make sure that the distributor is tight and does not wobble to ensure a proper function.

Step 5: Setting the gas pull voltage

Check the voltage of the gas train. There should be a slight voltage so that the throttle grip works smoothly. If necessary, adjust the voltage by turning the adjustment screw on the carburetor.

Step 6: Functional test

Start the motorcycle and test the throttle. Make sure that the gas train reacts correctly and that there are no unusual noises. Perform a test drive to confirm the functionality.

Care for the gas train

FAQ

How often should the gas train be changed?

The gas train should be changed every 2-3 years or when wearing. Pay attention to cracks or discoloration.

Can I change the gas train myself?

Yes, changing the gas train is a simple task that can be carried out by everyone with the right tools and instructions.