Installation instructions for 4 LED turn signal black resistances [E -test mark] - Honda CB 125 250 300 600 900 1000 R

• Step 1: Preparation
• Step 2: Remove old indicators
• Step 3: Install new turn signals
• Step 4: Connect resistance
• Step 5: function test
• Step 6: Completion

Step 1: Preparation

Before you start installing the new LED blinker, make sure that you have all the required tools and materials. These include: screwdrivers, pliers, insulating tape and the new LED indicators with resistances.

Step 2: Remove old indicators

Switch off the motorcycle and remove the ignition. Use the screwdriver to carefully unscrew the old indicators. Make sure not to damage the cables.

Step 3: Install new turn signals

Place the new LED indicators in the place of the old indicators. Attach with the screws and make sure you sit tight.

Step 4: Connect resistance

The resistors are necessary to adapt the flashing frequency of the LED indicators. Connect the resistances according to the enclosed instructions. Make sure that the connections are safe.

Step 5: function test

Turn on the motorcycle and test the new turn signals. Check whether you flash correctly and whether the frequency is normal.

Step 6: Completion

If everything works perfectly, you insulate the connections with insulating tape to protect them from moisture and dirt. Switch off the motorcycle and clear your job.

Care tips

FAQ 1: Do I need special tools for installation?

No, the installation of the LED indicators can be carried out with common tools such as a screwdriver and pliers.

FAQ 2: Are the indicators compatible with my motorcycle?

These LED blinkers are compatible with the Honda CB 125, 250, 300, 500, 600, 900 and 1000 R. Please check the specifications of your motorcycle before buying.