Installation instructions for 4 LED blinker black resistances [E -test mark] - BMW G 310 F 700 800 R S GS

• Step 1: Preparation
• Step 2: Remove old indicators
• Step 3: Install new turn signals
• Step 4: Connect resistance
• Step 5: function test
• Step 6: Care and maintenance

Step 1: Preparation

Before you start installing the new LED blinker, make sure that your motorcycle is turned off and the ignition key is removed. Put all the tools required, including screwdrivers, pliers and insulating tape.

Step 2: Remove old indicators

Start removing the old indicators. Loosen the screws that hold the turn signals in place and carefully pull off the plugs. Make sure not to damage the cables.

Step 3: Install new turn signals

Place the new LED blinkers in the place of the old indicators. Attach them with the appropriate screws and tighten them. Make sure you sit well and don't wobble.

Step 4: Connect resistance

Connect the supplied resistors to the turn signal cables to ensure a correct flashing frequency. Isolate the connections well with insulating tape to avoid short circuits.

Step 5: function test

Before you put the cladding back on, test the new indicators. Turn on the ignition and press the indicator. Make sure that all indicators work correctly.

Step 6: Care and maintenance

Check the function of your LED indicators regularly. Clean the turn signals with a soft cloth and avoid aggressive cleaning agents. Pay attention to loose connections and, if necessary, pull in the screws.

Question 1: Are the indicators suitable for all BMW models?

The turn signals are specially designed for the BMW G 310, F 700, F 800 R, S and GS models. Check the compatibility with your model before installation.

Question 2: How long do the LED indicators last?

LED blinkers have a very long service life, usually between 30,000 and 50,000 hours, depending on use and care.