4 LED blinker clearly resistances - triumph tiger

Step 1: Preparation

Before you start installing the LED blinkers, make sure you have all the tools you need. This includes a screwdriver, pliers and the new LED indicators with resistances. It is advisable to separate the battery to avoid short circuits.

Step 2: Remove old indicators

Start removing the old indicators. Loosen the screws that hold the indicators in their place and carefully pull off the cables. Make sure not to damage the cable connections.

Step 3: attach resistance

The LED blinkers need resistance to function correctly. Connect the resistances in accordance with the instructions supplied. Make sure to connect the plus and minus cables correctly.

Step 4: Install new turn signals

Install the new LED indicators at the point of the old. Attach them with the screws and make sure that the cables are properly laid to avoid tangling.

Step 5: function test

After the new turn signals are installed, connect the battery and test the turn signals. Make sure that you flash properly and have no malfunctions.

Step 6: Care and maintenance

Check the functionality of your indicators and resistors regularly. Clean the turn signals if necessary and make sure that all connections are tight.

Question 1: Why do I need resistance for LED blinkers?

LED blinkers have a lower power consumption than conventional light bulbs, which can cause the flink crelais to not work properly. Resistance ensure that the current flow is increased and the indicators flash correctly.

Question 2: Can I install the LED indicators without resistances?

It is not recommended to install LED indicators without resistances, as this can lead to a malfunction of the indicators. In some cases, this can also cause the indicators not flashing properly or glow permanently.

4 LED blinker Clear resistance [E -test mark] - Triumph Tiger 855i 900 955i 1050 1200

Price: 49.00 €

Make an offer
Make an offer
Make an offer