Installation instructions for 4 LED turn signals Clear resistors [E -test mark] - Triumph Speed ​​Triple 955i 10501200 Street 675

• Step 1: Preparation
• Step 2: Remove old indicators
• Step 3: attach resistance
• Step 4: mount new indicators
• Step 5: Check cabling
• Step 6: Functional test

Step 1: Preparation

Before you start installation, make sure that you have all the required tools and materials. This includes the new LED blinkers, resistances with e-test marks, a screwdriver, pliers and insulating tape.

Step 2: Remove old indicators

Switch off the motorcycle and remove the ignition key. Loosen the screws of the old indicators and pull off the plugs. Make sure not to damage the cables.

Step 3: attach resistance

Connect the resistances to the cables of the new LED blinkers. Make sure to consider the polarity to ensure correct operation. Isolate the connections carefully with insulating tape.

Step 4: mount new indicators

Place the new LED blinkers to the places provided and attach them to the screws previously removed. Make sure you sit tight and don't wobble.

Step 5: Check cabling

Check the entire cabling for correct connections. Make sure that all connections are securely and well insulated to avoid short circuits.

Step 6: Functional test

Turn on the ignition and test the new turn signals. Make sure that you flash evenly and that no error messages are displayed. If necessary, check the cabling again.

How long do LED turn signals last?

LED blinkers usually have a lifespan of up to 50,000 hours, which makes it a long -lasting alternative to conventional light bulbs.

Do I need special tools for installation?

For the installation you need basic tools such as a screwdriver and pliers. No special tools are required, but a multimeter can be helpful to check the cabling.