4 LED blinker Clear resistance [E-test mark]-Suzuki GSR 750 GSX-R600

Step 1: Preparation

Before you start installing the new LED blinkers, make sure that you have all the required tools and materials. These include: a screwdriver, pliers, soldering iron, shrink tube and the new LED blinkers with resistances.

Step 2: Remove old indicators

Start removing the old indicators from your motorcycle. Loosen the screws or clips that hold the turn signals and carefully pull off the cables. Make sure not to damage the cabling.

Step 3: attach resistance

The new LED blinkers need resistance to keep the flashing frequency correctly. Line the resistances into the cable connection of the turn signals and use shrink tube to isolate the connections.

Step 4: mount new indicators

Use the new LED indicators in the places provided. Attach them with the corresponding screws or clips and connect the cable connections. Make sure that polarity is right.

Step 5: Functional test

After installation, check whether the new indicators work correctly. Turn on the ignition and press the indicator. Make sure that you flash properly both left and right.

Step 6: Care and maintenance

To extend the lifespan of your LED indicators, clean them regularly from dirt and dust. Check the cable connections for corrosion and make sure that all parts are securely attached.

FAQ 1: Why do I need resistance to my LED indicators?

LED blinkers have a lower power consumption than conventional light bulbs. Without resistances, the turn signal flashes faster, which can lead to a malfunction. The resistances ensure that the flashing frequency remains correct.

FAQ 2: Are the new LED blinker weatherproof?

Most LED blinkers on the market are weatherproof or even waterproof. However, check the manufacturer's specifications to ensure that they are suitable for use in different weather conditions.

4 LED blinker Clear resistance [E-test mark]-Suzuki GSR 750 GSX-R600

Price: 49.00 €

Make an offer
Make an offer
Make an offer