Step 1: Make preparations

Before you start installation, make sure that you have all the tools you need: screwdriver, pliers, cable cutters and insulating tape. Switch off the motorcycle and remove the key from the ignition lock.

Step 2: Remove old indicators

Remove the covers of the old indicators. Loosen the screws and carefully pull off the turn signals. Separate the cable connections and make sure that no parts are in the way.

Step 3: Prepare resistance

Connect the resistances to the new LED indicators. Make sure to connect the right cables. Isolate the connections with insulating tape to avoid short circuits.

Step 4: Install new turn signals

Place the new LED indicators to the places provided and attach them to the screws. Make sure you sit tight and don't wobble.

Step 5: Check functionality

Turn on the motorcycle and test the new turn signals. Check whether you flash correctly and whether the resistors work properly. Make sure that no error messages appear on the display.

Step 6: Care of the indicators

Clean the turn signals regularly with a damp cloth to remove dirt and dust. Check the cabling for damage and replace defective parts immediately.

How often should the indicators be checked?

It is recommended to check the indicators at least once a month, especially before long journeys.

What to do if the indicators don't work?

First check the wiring and resistances. If everything is fine, the turn signal could be defective and must be replaced.

4 LED blinker Clear resistance [E -test mark] - Kawasaki Ninja 250 300 400 650 1000

Price: 49.00 €