Installation instructions for 4 LED blinkers Clear resistors [E -test mark] - Husqvarna Supermoto Vitpilen Svartpilen 401 701

• Step 1: Preparation
• Step 2: Remove old indicators
• Step 3: Install LED turn signal
• Step 4: Install resistance
• Step 5: Functional test
• Step 6: Care instructions

Step 1: Preparation

Make sure you have all the tools and parts you need. This includes the new LED indicators, resistors, wrenches and insulating tape.

Step 2: Remove old indicators

Loosen the screws of the old indicator with a wrench and pull the cables off. Make sure not to damage the cables.

Step 3: Install LED turn signal

Place the new LED indicators in the places provided. Attach them with the screws you have previously removed.

Step 4: Install resistance

Connect the resistances to the LED indicators. Make sure the connections are tight to ensure a correct function.

Step 5: Functional test

Turn on the ignition and test the new turn signals. Make sure that you flash evenly and that no error messages are displayed.

Step 6: Care instructions

FAQ 1: Why do I need resistance for LED blinkers?

Resistance is necessary to adapt the flashing frequency of the LED blinkers to that of the original. Without resistances, the indicators could flash faster or do not work at all.

FAQ 2: Where can I buy the right resistance?

The right resistors can be purchased in motorcycle accessories or online from specialized retailers. Make sure that you are suitable for LED blinkers.