2 LED turn signal black resistances [e -test mark] - Triumph tiger

Step 1: Preparation

Before you start installing the new LED blinkers, make sure you have all the tools you need. This includes a screwdriver, pliers, cable cutters and insulating tape.

Step 2: Remove old indicators

Switch off the motorcycle and remove the ignition. Loosen the screws that hold the old indicators and carefully pull off the turn signals. Make sure not to damage the cables.

Step 3: Mount new indicators

Place the new LED blinkers to the places provided and attach them to the right screws. Make sure you sit firmly and not wobble.

Step 4: Install resistance

Connect the supplied resistances to the cables of the new indicators. These are necessary to ensure the correct flashing frequency. Make sure to seal the connections well to avoid short circuits.

Step 5: Test connection

Turn on the ignition and test the new turn signals. Make sure that you flash in the right frequency. If you flash too quickly, check the installation of the resistances.

Step 6: End control

Perform a final review of all connections and fortifications. Make sure everything is firmly sitting and there are no loose cables. Your motorcycle is now ready for the street!

Care tips

FAQ

How long do the installation work last?

The installation of the LED blinkers should be completed in about 30 to 60 minutes, depending on their experience.

Do I need special tools for installation?

For the installation you need basic tools such as a screwdriver, pliers and cable cutters. These are usually available in every household.

2 LED turn signal black resistances [E -test mark] - Triumph Tiger 855i 900 955i 1050 1200

Price: € 29

Make an offer
Make an offer
Make an offer