Step 1: required tools and materials

To install the 2 LED blinker, you need the following tool:

Step 2: Make preparations

Make sure your motorcycle is on a stable surface. Switch off the ignition and separate the battery to avoid short circuits.

Step 3: Remove old indicators

Open the cover of the old indicators by loosening the screws. Separate the cables by carefully pulling the plugs. Enter the old turn signals safely if you want to reuse them.

Step 4: Install new turn signals

Use the new LED blinker at the desired location and attach them to the supplied screws. Make sure that you are firmly sitting and correctly aligned.

Step 5: Connect resistance

Connect the resistances according to the enclosed instructions. These prevent the indicators from flashing too quickly. Make sure the connections are well insulated.

Step 6: Perform the function test

Before you connect the battery, check all connections. Then connect the battery and test the turn signals to ensure that you work properly.

Care tips

FAQ 1: How long do LED turn signals last?

LED blinkers have a long lifespan of up to 50,000 hours if they are installed and cared for properly.

FAQ 2: Do I always have to use the resistance?

Yes, the resistances are necessary to ensure correct flashing and avoid overloading the electrical system.

2 LED blinker black resistances [E -test mark] - Ducati Hypermotard 796 821 939 950 1100

Price: € 29