2 LED blinker clear resistances [E -test mark] - Triumph Trident 660

Step 1: Preparation

Before starting the LED blinker, you should make sure that the ignition of your motorcycle is switched off. Provide all the required tools and materials, including the new turn signals, cables and resistances.

Step 2: Remove old indicators

To remove the old indicators, loosen the screws you attach to the motorcycle. Carefully separate the cable connections to avoid damage.

Step 3: attach resistance

The LED blinkers need resistance to function correctly. Connect the resistances to the cables of the new turn signals and make sure that the connections are well insulated to avoid short circuits.

Step 4: Install new turn signals

Use the new LED indicators to the intended areas. Attach them with the screws and make sure that you sit firmly to ensure a safe journey.

Step 5: Check functionality

Turn on the ignition and test the new turn signals. Check whether you flash properly and whether the resistors are correctly connected. If you have any problems, check the connections again.

Step 6: Care and maintenance

To extend the lifespan of your LED indicators, clean them regularly from dirt and dust. Also check the cable connections and resistances for wear or damage.

What are the advantages of LED indicators?

LED blinkers are more energy -efficient, more durable and offer better visibility compared to conventional incandescent lamp indicators.

How can I make sure that the resistors are installed correctly?

Make sure that the resistors are firmly connected to the cables and is well insulated. Check the functionality of the indicators after installation.

2 LED blinker clear resistances [E -test mark] - Triumph Trident 660

Price: € 29

Make an offer
Make an offer
Make an offer