Step 1: Preparation

Make sure that your Suzuki SV 650 or V-current is switched off. Provide all the required tools and materials, such as wrenches, insulating tape and the new LED blinkers with resistances.

Step 2: Remove old indicators

Start removing the old indicators. Loosen the screws with a wrench and pull off the flashing cables. Make sure not to damage the cables.

Step 3: Mount new indicators

Use the new LED blinkers at the intended location and attach them to the screws. Make sure to align the indicators correctly so that they are clearly visible.

Step 4: Connect resistance

Connect the supplied resistors in parallel with the new indicators. This is necessary to ensure correct flashing of the LED indicators. Connect the cables safely and insulate the connections with insulating tape.

Step 5: function test

Turn on the ignition and test the new turn signals. Check whether both indicators work properly and flash in the right frequency.

Step 6: Care instructions

FAQ 1: Are the LED indicators of E-test mark certified?

Yes, the LED blinkers are equipped with an e-test mark, which means that they meet the legal requirements and are permitted for road traffic.

FAQ 2: Do I need special tools for installation?

Only basic tools such as a wrench and insulating tape are required to install the LED blinkers. You can find detailed instructions above.

2 LED blinker Clear resistance [E-test mark]-Suzuki SV 650 1000 V-Strom

Price: € 29