Step 1: Preparation

Before you start installation, make sure you have all the tools you need. This includes a screwdriver, pliers and insulating tape. Switch off the ignition of the motorcycle and pull off the key.

Step 2: Remove old indicators

Open the turn signal brackets and remove the old indicators by loosening the screws. Make sure you cut the cables carefully to avoid damage.

Step 3: Connect new turn signals

Connect the cables of the new LED blinkers to the corresponding cables of the motorcycle. Make sure to consider the polarity. Use insulating tape to secure the connections.

Step 4: Install resistance

Install the supplied resistors to regulate the flashing of the LEDs. Attach them to a suitable place to the motorcycle and connect the cables here too. Make sure that everything is well isolated.

Step 5: Functional test

Turn on the ignition and test the new turn signals. Make sure that it flashes correctly and the speed corresponds to the regulations.

Step 6: Care instructions

To extend the lifespan of your new indicators, clean them regularly with a soft cloth and do not use aggressive cleaning agents. Check the cable connections every few months.

Question 1: Are the LED indicators legal?

Yes, the LED indicators with e-test marks are legal and correspond to the applicable regulations.

Question 2: What are the advantages of LED indicators?

LED blinkers are energy -efficient, have a longer lifespan and offer better visibility compared to conventional flashing lights.

2 LED blinker Clear resistance [E -test mark] - Kawasaki Z 125 650 900 H2 RS

Price: € 29