Step 1: Preparation

Before you start installing the new LED blinker, make sure that the motorcycle is on a stable surface and the engine is switched off. Wear suitable protective gloves and work in a well -ventilated area.

Step 2: Remove old indicators

Start removing the old indicators. Loosen the screws that hold the indicators in their place and separate the electrical connections. Make sure not to damage the cables.

Step 3: Mount new indicators

Place the new LED blinkers in the place of the old turn signal and attach them with the corresponding screws. Make sure you sit firmly and are in the right position.

Step 4: Connect resistance

Connect the supplied resistors to the turn signals to avoid an error message in the on -board computer. Connect the cables in accordance with the instructions in the packaging of the resistors.

Step 5: function test

After everything is connected, switch on the motorcycle and test the new indicators. Make sure that you flash properly and that no warning lights are displayed on the dashboard.

Step 6: Care and maintenance

Check the turn signals regularly for firmly seated connections and damage. Carefully clean the turn signals with a damp cloth to get the visibility.

Question 1: Are the LED indicators weatherproof?

Yes, the LED blinkers are weatherproof and designed for use under different weather conditions.

Question 2: Do I need special tools for installation?

For the installation, you usually need a screwdriver and possibly a side cutter to remove the old cables. Tongs can also be helpful.

2 LED blinker Clear resistors [E -test mark] - Husqvarna Supermoto Vitpilen Svartpilen 401 701

Price: € 29