Step 1: Preparation

Before you start installing the new LED blinker, make sure that you get all the required tools: wrenches, screwdriver, pliers and possibly insulating tape.

Step 2: Remove old indicators

Switch off the motorcycle and carefully remove the old indicators. To do this, you have to loosen the screws and remove the electrical plugs. Make sure not to damage the cables.

Step 3: attach new indicators

Place the new LED indicators in the place of the old indicators. Attach the electrical plugs with the corresponding screws and connect the electrical plugs. Make sure everything sits firmly.

Step 4: Install resistance

Install the supplied resistors to adjust the flashing frequency of the LED indicators. Connect the resistors according to the instructions to the turn signal cables. Pay attention to the right polarity.

Step 5: function test

Turn on the motorcycle and test the new turn signals. Check whether you flash properly and have the right speed. If everything works, you are ready for the next trip!

Step 6: Care of the indicators

In order to extend the lifespan of your new indicators, they regularly clean them regularly with a soft cloth and a mild cleaning agent. Avoid aggressive chemicals that could damage the material.

FAQ 1: Are the LED indicators safe with the e-test mark?

Yes, the LED blinkers with e-test marks are checked according to European standards and therefore safe for road traffic.

FAQ 2: Can I install the indicators myself?

Yes, the installation can usually be carried out itself as long as you have basic craftsmanship and tools.

2 LED blinker Clear resistance [E -test mark] - Honda CB 125 250 300 600 900 1000 R

Price: € 29