Sort + Filter
€392,00 EUR
€411,00 EUR
€105,00 EUR
€243,00 EUR
€21,00 EUR
Motul oils & fluids - high -performance lubricants for every motorcycle, every route, every season
Performance, longevity and a silk -soft switching feeling begin with the right oil. Developed since 1853 Engine in French laboratories high-performance fluids that combine racing know-how with suitability for everyday use. Of the 300V Escore Generation to fully synthetic gear oils to silicone -free forkluids - Motul offers a complete portfolio for 4-stroke and 2-stroke engines, Classic wet couplings and modern quick-shift transmission. In this category we present the most important Motul motorcycle products, explain additive packages, viscosity classes and the different API specifications-practical, brand-independent and tailored to touring, racing and off-road needs.
1 | Motul-DNA-Ester technology & race gene
✓ Estercore® base
Synthetic esters chain on metal surfaces, reduce friction by up to 15 % compared to pure Pao oils.
✓ Nitroboost additives
Higher stability with 50 % nitromethane in the drag-race-oil film retains HTHS> 3.5 MPa s.
✓ Jaso Ma-/MA2 releases
Full clutch compatibility, no risk of slipping, also for series lip couplings.
✓ Zinc & phosphorus package (ZDDP)
1 100 ppm for classic cams, air cooling boxers and flat stacking valve drives-reduced wear at cold starts.
2 | 4-stroke motor oils-from touring boxers to superbike
2.1 300V Factory Line - if speed does not know any limit
The 300V Factory Line Is Motul's flagship: pure Ester base, high polymers without shear stabilizers, two street legal viscosities (5W-40 & 10W-50) plus five racing degrees (0W-8 to 15W-60). Developed for WSBK, Moto2 and EWC teams, but can be used on every street motorcycle thanks to API SN.
✓ 0W-8 Road Racing
Minimal rolling frame, Oil-pressure> 2 bar @ 110 ° C.
✓ 5W-40
Track Day all-rounder, shear cut <4 %, TBN 8.7-optimal neutralization reserve.
✓ 10W-50
For air -cooled Twins, oil temperature up to 145 ° C without viscosity collapse.
2.2 7100 4T - full synthetic for street & travel endors
If you commute every day or plan European trips, use it 7100 4T. Ester reinforced, but with PAO content for a gentler price/performance ratio. Jaso MA2 guarantees jerk and noiseless coupling, even with hot gearbox. Available in 5W-40, 10W-40, 10W-50, 10W-60-cover for all manufacturer's specifications from KTM LC8 to BMW ShiftCam.
2.3 5100 4T-Technosynthese® for Classic bikes & mid-range
Technosynthesis combines 30 % ester with hydro-cracked oil-based, resulting in high film shearing stability at a moderate price. Ideal for Yamaha Ténéré 600, Honda CB Sevenfifty or BMW R-Airheads, who like "thick" 15W-50. API SL avoids phosphorus overload of the KAT insert, TBN 8 protects acid-sensitive bronze guides.
3 | 2-stroke motor oils-from moped to 300 EXC
3.1 800 Factory Line Off-Road & Road Racing
800 2T is based on the same double grain molecules as 300V, but burns with little residue. Mixture up to 50: 1, separate lubrication up to 14,000 RPm. Hinote test only shows 4 % deposition according to 4 h @ 11 000 RPM, piston rings freely movable. Perfect for KTM, Husqvarna and Aprilia RS-125 Rotax.
3.2 710 2T & 510 2T - street legal with Jaso FD
For scooters, Daily-Driver and Old School-Zweigakter offers 710 2T Fully synthetic, smoke -reduced lubrication. 510 2T is part-synthetic alternative for Vespisti or Yamaha DT-125-R lover-minimal oil consumption, optimal corrosion prevention in the winter camp.
4 | Gearbox & hypoid oils- precise switching and cardan performance
4.1 Gear 300 75W-90 & 300 LS 75W-90
Full-synthetic GL-5 hypoid oil with Ester film: shear stability> 14 MPa S @ 150 ° C. Perfect for BMW-Kardan, Moto-Guzzi-Carc or Ducati Panigale- "Superquadro" gear. The LS variant (Limited Slip) contains frictional modifiers-no stick-slip in oil bath water clutch differentials of the side-by-side quad.
4.2 Transoil Expert 10W-40-Gearing oil for 2-stroke wet coupling
SAE 10W-40 transmission oil with extreme pressure additives, Jaso Ma coupling grip, clear reduction in coupling core life (Yamaha-Minarelli MX). 99 MPA welding load in the FZG test-protects switching discs on blockdown.
4.3 Motylgear 75W-90-Price-conscious Technosynthese®
Best solution if maintenance intervals are to remain short: 40 % Ester, 60 % HC base, API GL-4 /5, broaching security, thermal protection up to 150 ° C-ideal for elderly moto-Guzzi- falcone "or BMW /5 boxer.
5 | Fork & shock absorber fluids- always the right damping characteristic
The Motul Fork Oil Factory Line Cover seven viscosities: 2.5 W, 5 W, 7.5 W, 10 W, 15 W, 20 W, 30 W. Thanks to anti-foam technology, damping curves remain constant, even after 35 min enduro-cross. For air/oil-USD forks (Showa BPF, WP X-ACT) we recommend Light/medium 7.5 W; Classic Marzocchi-42 mm tolerate telegabels Medium/heavy 15 w.
✓ CCS foam test-19 % less cavitation than mineral oils.
✓ Seal Compat-Safe-O-rings Viton / NBR, no swelling, no tough change.
6 | Practice guidelines - which engine oil for which bike?
| Motorcycle type | Recommended engine oil | Gears / Kardan | Fork oil |
|---|---|---|---|
| Superbike (Ducati Panigale V4, BMW S1000RR) | 300V 5W-40 Factory Line | Gear 300 75W-90 | Fork Oil Light 5 W |
| Adventure (Yamaha Ténéré 700, KTM 790 Adventure) | 7100 10W-50 | Motylgear 75W-90 | Fork Oil Light/Medium 7.5 W |
| Classic Boxer (BMW R100 S /7) | 5100 15W-50 Technosynthesis | Motylgear 80W-90 GL-4 | Fork Oil Medium 15 W |
| 2-stroke enduro (KTM 300 EXC) | 800 off-road 2T Premix 50: 1 | Transoil Expert 10W-40 | Fork Oil Light/Medium 7.5 W |
7 | Environment & Certifications
- ✓ ACEA E9-09 -Low saps for Euro 5-Kat, selected 7100 viscosities.
- ✓ REACH-compliant additives - Free of zinc dialkyldithiophosphate over 1,200 ppm.
- ✓ Biologically degradable 2T oil "Bio 2T" - 80 % in 21 days, OECD 301 F.
- ✓ Packaging -Bottles made of 50 % PCR HDPE, labels solvent-free.
8 | Frequently asked questions
Can I also use 300V in a 20,000 km touring bike?
Yes, as long as change interval ≤ 6,000 km remains. High ester share reacts more with fuel residues-avoid short distances.
Can I fill gear oil 75W-90 into a hypoid cardan?
Yes-Gear 300 and Motylgear are GL-5, but contain limited slip additives that absorb hypoid printing.
Which fork oil for WP aer 48 Air-USD?
Factory Line 2.5 W for damper side, air camera page without oil.
Is 5100 4T compatible with wet clutch?
Complete, Jaso MA release does not guarantee a clutch slide.
Conclusion-Why Motul sets the maintenance benchmark
From the RC213V MOTOGP prototype to the 40-year-old Yamaha XT 500, Motul oils find the way under every valve lid-because they are temperature-resistant, shear-stable and gentle on the material. Anyone who loves torque needs film-strong ester protection; If you are a kilometer eater, you relate to persistent additive packages. With Motul you have both: racing genes and everyday life in a bottle. We store all motorcycle oils, gear and fork fluids fresh, cool and first-in-first-out-so that you only pour the best into the engine. Lubricants of Champions - now in the shop.
Discover our complete Range -From 0W-8 racing oil to 30 W vintage mono, everything available immediately!
