Sort + Filter
€324,00 EUR
€19,00 EUR
€154,00 EUR
€224,00 EUR
€159,00 EUR
€389,00 EUR
€19,00 EUR
€119,00 EUR
€19,00 EUR
Moto Guzzi Norge 1200 - Comfort from Mandello perfectly maintained
The Moto Guzzi Norge 1200 is a top -class touring machine, which was produced from 2006 to 2016. It combines the unmistakable character of a Moto-Guzzi-V2 engine with a chassis developed for long-haul, comfortable equipment and modern design. In order to maintain your performance and comfort for years, careful maintenance with high -quality spare parts is essential. In this comprehensive overview we show you all relevant assemblies, typical wear parts, maintenance intervals and upgrade options for your Norge 1200.
1 | Modellübersicht und Baujahre
The Norge 1200 was offered in various versions:
- 2006–2010: Moto Guzzi Norge 1200 TDM with 95 hp and 2-valve engine (Stelvio variant)
- 2011–2016: Moto Guzzi Norge 1200 GT 8V with 1200 cm³ and four-valve cylinder heads
Both versions offer ABS, heated handles, on -board computers, a large windshield and solid tour equipment. The 8V version received revised cylinder heads that became more reliable from 2013.
2 | Motor and drive
The air-oiled V2 with a 90 ° angle is the heart of the Norge. A good maintenance includes:
- Cylinder head seals: Important in the event of oil loss in the area of the valve lid
- Valve cover seals: Silicond seals, e.g. B. particularly heat-resistant for 8V models
- Piston rings: For engines with high oil consumption - suitable repair rates are available
- Gearbox rings: In the case of oil leaks on the cardan drive
- Motor warehouse: Especially in the case of vibrations or play in the housing
Tip: The valve game should be checked every 10,000–12,000 km. Different values apply to 2V and 8V.
3 | Kardan and gearbox
The Norge has a low -maintenance cardan drive, which should be checked regularly:
- Cardan cuffs: Riss formation leads to water and dirt entry
- Gear ventilation: Constitious ventilation can lead to oil pressure assembly
- Seals gear cover: Oil exit on the back of the gearbox
Maintenance: Change cardan and gear oil every 20,000 km.
4 | Chassis and damping
The Norge offers a comfortable but still precise driving behavior. Current parts parts are:
- Fork rings: Simmer ring set including dust caps for 45 mm USD fork
- Steering head camp: at rest points or restless straight run
- Spring on the back: Original or available as YSS/Wilbers upgrade
Service interval: Fork oil every 30,000 km, featherbone overtake after 40,000 km.
5 | Brake system
The combined brakes with ABS cause good delay, but require maintenance:
- Brake pads: Sintering at the front (4-piston cloak), organically back
- Bremsscheiben: Original 320 mm front, 282 mm at the back
- Steel flex lines: For a better feeling of braking and reduced maintenance
- ABS sensors: Corroding in older models, check calibration
Tip: Swap brake fluid every 2 years.
6 | Electrics and control
The on -board electronics of the Norge is complex, but rock solid. Pay attention to:
- Relay: For injection, ignition, lighting system
- ECU control unit: Marelli unit; Check for starting problems or misfires
- Lighting machine controller: For even power supply
- Battery: AGM or LIFEPO4 with 14Ah recommended
- Wiring harness: Pay attention to scouring points and loose plug connections
Workshop tip: Treat the ECU plug with contact spray.
7 | Instruments and cockpit
The cockpit with an analogous tachometer and digital on -board computer occasionally needs care:
- Tacho/speed provider: inductive, mostly in the event of a failure of the cable break
- Lamp instruments: Night lighting with 12V T5 lamps
- Switch units: Note water and corrosion protection
8 | Body, cladding & disc
The Norge was equipped with full cladding for long -distance tours. Popular spare parts:
- Wind shield: Original, tinted or touring disc from MRA
- Mirror: Low vibration, for clear consideration
- Desolation holder: For disc and side panels
- Seat: OEM or comfort version with gel insert
- Luggage rack: optional for topcase, suitcase carrier
Care tip: Treat disguise parts with plastic cleaners, secure screw connections against vibrations.
9 | Exhaust system
The 2-in-1 exhaust system supports the uniform power output. Exchange parts:
- Calp seals: Copper rings should be replaced at each disassembly
- Endt pot: OEM or Leovince/Arrow for more sound
- LambdaS probe: Important for clean idling
Tip: When loss of performance, pay attention to cracks in the manifold system.
10 | Maintenance parts & intervals
The most important standard expectations of the Norge 1200 are:
| service | interval | Spare parts |
|---|---|---|
| Motor oil + filter | 10,000 km | 10W-60 + HIFLO HF552 |
| Valve game | 12,000 km | Shim-kit 8V or adjustment screw 2V |
| Gear oil | 20,000 km | 75W-90 GL5 |
| Cardan oil | 20,000 km | 80W-90 Hypoid |
| Refrigeration | every 2 years | G12 ++ compatible |
| Spark plugs | 20.000 km | Ngk CR8EKB |
| brake fluid | 2 years | Dot 4 |
11 | Frequent problems and solutions
- Blower machinery controller defective: Voltage drop in the light switched on, exchange by MOSFET controller
- ABS extension: Contact problems on sensor plugs or weak battery
- Jerking when accelerating: Throttlaps synchronization required
- Lenant flutter: Check the steering head bearing, replace if necessary
12 | Performance & comfort upgrades
- Sports exhaust systems: Leovince, Remus for Sateful Sound
- Wilbers spring bone: For better solo and passenger operation
- Navi holder: Touratech or SW-Motech
- Heating handles: Oxford universe set in the event of failure of the OEM heater
- Luggage systems: Givi or Hepco & Becker case carrier
Conclusion
The Moto Guzzi Norge 1200 is a mature touring motorcycle with a real character. With the right ones Spare parts And regular care remains a reliable companion on long routes. From the engine to electronics to the body, all components can be replaced or upgraded by quality -tested parts. Whether you make your motorcycle fit for the next season or just want to refine it with new attachments - with us you will find everything you need.
